Concrete floor installation in Newport Beach CA - a level slab built on a solid base
Old floor cracked, sunk or shedding dust? We pour a new concrete floor on a packed base, with the finishing timed right.
- Owner at every estimate I measure, check the ground and plan your floor myself.
- Base before finish We dig out and pack the base before any pour.
- Joints cut on time The cuts go where we choose, before cracks pick their spot.
- Our own crew Our crew does the work, led by a foreman I trained.
- Fully licensed and insured.
- Free in-person estimates.
- Replies within 1 business day.
How do you know your concrete floor needs replacing?
A concrete floor tells you when something's wrong underneath or on top, and the sooner you catch it, the more choices you have before you're pulling up flooring.
Cracks that keep getting wider
A hairline crack is normal, but one that widens or steps up on one side usually means the base moved, and the tile or wood over it will follow.
A floor that sank in spots
Low spots where furniture rocks or spills collect usually mean the ground under the slab settled, and the dip tends to get deeper the longer it's left.
Gray dust on the surface
A powder that comes back right after you sweep usually means the top was finished or cured poorly, so it keeps shedding and won't hold a coating well.
Chipping and flaking on top
When the surface peels off in thin flakes, the top layer is weak, and every chip opens more of it to wear until the whole surface goes.
Flooring that won't lay flat
Tile that cracks or wood that bounces over an old slab usually points to high and low spots, and new flooring on top just means paying twice.
A new room without a floor
An addition, workshop or converted space needs its slab planned from the base up, and getting that right before the walls go in saves tearing into them later.
How we install a concrete floor
I start with what the floor will sit on, the subgrade, and with how you'll use the room and whether it gets tile, wood or carpet, because those decide the base we build. Our crew digs out and packs the base, sets the rebar, the steel that holds the slab together, then pours and finishes. Indoors we time the finishing and the control joints closely, since that's where a floor goes right or wrong, and those saw cuts give the slab a line we picked to crack along instead of one it picks for itself. After that the concrete cures, a wait while it gains strength before you put it to use. When a budget gets tight, people want to trim the base because nobody sees it on day one, and I won't, because a nice finish on a bad base is just a pretty crack waiting to show up. The floor's size, the base work your ground needs and the steel inside it move the price, the base prep, inspections and cure move the schedule, and you'll see your own figure in the written estimate.
The floor often isn't the only concrete on the job. If the new room opens to the yard, we can pour concrete steps down from the door, and outside by the water we build concrete pool decks with a broom finish, a light brushed texture that gives bare feet some grip.
What happens after you call about a concrete floor in Newport Beach?
From your first call to the walk-through, here's how a new floor goes with us and who handles each part of it.
Call and set up a visit
Call (949) 691-0410 or send the form, and we'll set a time for me to come out and measure the space.
Get a written estimate
I look at what's under and around the spot and ask how you'll use the floor. Then you get the estimate in writing.
Permits, base, pour and finish
We handle the permits for our part and book the city inspections. Then our crew preps the base, pours and finishes the floor.
Walk the finished floor
We clean up and walk the floor with you, and go over how long to wait before foot traffic and heavier loads.
Why Newport Beach homeowners call Homestead Newport Beach Concrete
I check the ground first
Some parts of Orange County have expansive soil, so I come out to every estimate and look at what's under the spot.
A foreman I trained
Our own crew does the work, led by a foreman I trained, so the floor gets built the way it was planned.
In business since 2013
I learned under a boss who made me tear out anything I rushed, and we've worked that way since 2013.
Licensed and insured for concrete
We're fully licensed and insured. California's license board has its own class for contractors who form, pour and finish flat concrete work.
Get a written estimate for your concrete floor
Send the floor's square footage, whether it'll get a covering and your move-in date, and we'll reply within one business day to set a visit. The estimate is free, in person and comes with no pressure to book.
Concrete floors to look through
Look through these examples of poured and finished concrete floors to get a feel for the textures and finishes you can choose from.
Questions about a new concrete floor
These are the questions people ask me most about new concrete floors. If yours isn't here, call or send the form and ask about your own job.
How much does a concrete floor cost in Orange County?
A concrete slab without staining or stamping usually costs about $7 to $14 per square foot in Orange County, according to one cost guide. That's the area's usual price, not ours, and the same guide puts a reinforced slab somewhat above an unreinforced pad per square foot. You'll get your own figure in a written estimate after I measure and check the ground.
Will my new concrete floor crack?
Some fine, random cracking should be expected in any concrete floor slab, even with joints cut close together, and I'd rather tell you that now than at the walk-through. Steel won't stop cracks, but properly sized and placed reinforcement should keep them tight, so ask any contractor how they'll reinforce the slab. Our work is satisfaction guaranteed, and I'll go over how we'll reinforce yours at the estimate.
Should a concrete floor be poured directly on a vapor barrier?
If the floor will get a covering like wood or vinyl, pouring right on a vapor barrier, a plastic sheet under the slab, gives that covering the most protection. The trade-off is that concrete on the barrier settles and changes size more than concrete on a draining base, so we decide it together before the pour.
How long does a new concrete floor take before you can walk on it?
One cost guide says a slab should be walkable within 48 hours, though concrete takes a month to fully cure. The same guide suggests waiting a week before heavier loads go on, so plan the moving truck and heavy furniture for after that.
What causes a concrete floor to turn dusty or uneven?
Poor timing usually does, when the placing, finishing, joint cutting or curing happens too early or too late. That can leave cracking, a dusty or flaking top and high or low spots, which is why timing is the part of the job we plan closest.
Who schedules city inspections for a new concrete floor in Newport Beach?
As the owner, you're the one who makes sure city inspections happen at the right stages, though your contractor may make the call. We book the inspections for our part of the work, and requests usually need a day or two of notice, by phone or online through the city's building department.
Where we work around Newport Beach
Newport Beach needs a building permit for all new construction, and its no-permit list names floor covering but not concrete floors, so we check with the Permit Center and pull the permits for our part. We do the same work in Costa Mesa, Irvine and the other cities below, so pick yours or give us a call.
Planning a new concrete floor? Let's talk it through.
Our phone hours run into the evening every day of the week, so call (949) 691-0410 or send the form whenever it suits you.